Siddhi Rubber Udyog

In order to meet the requirements of the bridge deformation, strip seal expansion joints are usually set at each end of the bridge between ends of the beam and abutment or on the hinge joints of the bridge. They are applied with rubber noise weaken board which can help to increase movement and reduce noise from over-passing traffic by up to 80%.

Features:

• Strip seal expansion joints are retractable and solid on both directions parallel and perpendicular to the bridge axis to ensure vehicles runs smoothly and no noise.
• Strip seal expansion joints can prevent rainwater permeation and dirt clogging.
• Strip seal expansion joints are simple and easy to install, check, maintain and clean.
• High strength, can withstand the weight of vehicles and pedestrians.

Additional Information:

• Production Capacity: 500/MTR
• Delivery Time: As Per Client
• Packaging Details: Good Packing

Other Details:

• The prime functional requirement of a joint is to cater for movements with very low resistance or with no resistance at all.
• The design of the Expansion joint is capable of accommodating all movements of the deck viz. translation and rotation, and also capable for all loads acting on it and local actions under all weather conditions.

Functions:

• It should permit the expansion and contraction of the span to which it fixed without causing any distress or vibration of the structure.
• Cause no inconvenience to the road user and offer good riding comfort.
• Should be capable of withstanding the traffic loads including dynamic effects.
• Should be watertight and capable of expelling debris without clogging.

Neoprene Expansion Joint are designed for offering safely absorption of heat induced expansion that causes contraction of construction material. 

Features:

• Reliable design
• Efficient performance
• Light weight
• Optimum size

We are offering Bridge Expansion Joint.

We "Siddhi Rubber Udyog" are the leading Manufacturer,s & Exporter of a wide range of PVC Water Stop Seal,Electricals Mats,Expansion Joints,Rubber Pads,HDPE/LDPE Sheet,Geotextiles,Drainage Board,Geocompoites,DrainCell,GeoCell,PVC & Rubber Profile,etc

The high quality Elastomeric Seal is inserted into specially designed and machines locking easily provided in the steel retainers. The system can be anchored with Elastomeric concrete structure.

Features:

• Water Resistance Sealing
• Heavy duty sealing
• Easy to install
• Impact absorbing
• Floor & wall application
• Resistant to ozone, chemicals, oil & fuel

Other Details:

• It is a watertight continuos membrane system for joints with movement up to 120mm in bridges, parking decks and elastomeric anchor blocks with insert steel plates for fixing rubber expansion joint to support heavy duty and high impacted load.
• It is mechanically sealed between the rubber block and concrete slab.
• An epoxy paste adhesive is applied both side of rubber to enhance the products water tight.
• Siddhi have versatile design for bridge, parking deck and different structure where movement is required.

Installation:

• The Compression Seal Expansion Joint System is installed by first applying a thin layer of lubricant cum adhesive to the side walls of the expansion joint gap.
• Then, the seal is compressed into the joint gap opening